thermionic
Well-known member
- Joined
- Jun 3, 2004
- Messages
- 1,671
Hi,
The PCB guy I work with has just made a slight revision to a tried and tested board which used 2.54mm Molex KK connectors. Unfortunately, the new layout doesn't provide enough width (in the narrowest dimension) to fit the array of connectors next to each other in line...
I can fit PCB-mount connectors in there, but it looks like a dog's dinner having them soldered to flying leads, and they don't lock, so are bound to pop out.
Is there such a beast as a 2.54mm connector that locks, but is thinner than a KK?
Thanks in advance.
Justin
The PCB guy I work with has just made a slight revision to a tried and tested board which used 2.54mm Molex KK connectors. Unfortunately, the new layout doesn't provide enough width (in the narrowest dimension) to fit the array of connectors next to each other in line...
I can fit PCB-mount connectors in there, but it looks like a dog's dinner having them soldered to flying leads, and they don't lock, so are bound to pop out.
Is there such a beast as a 2.54mm connector that locks, but is thinner than a KK?
Thanks in advance.
Justin