I'm glad to have been sent to this place from a guy from the MOJO PIE forum. He highly recommended it for any DIY issue.
I'm having 2 sennheiser md-441 mics here which after resoldering the broken wire at the coil are sounding bad.No highs, no basses.Also one of them was very sensible to direct-contact(fingers touching the housing) until it the capsule was readjusted a little bit inside the housing.But still sounding strange. Can anyone give me some contribution in the form of own experiences repairing these mics. a recplacing of the capsule is almost as expensive as purchasing it new. I could get a working reference 441 from a friend, so i would appreciate any suggestions about how-to make it, because i'm not a very trained technician.
Phil
I'm having 2 sennheiser md-441 mics here which after resoldering the broken wire at the coil are sounding bad.No highs, no basses.Also one of them was very sensible to direct-contact(fingers touching the housing) until it the capsule was readjusted a little bit inside the housing.But still sounding strange. Can anyone give me some contribution in the form of own experiences repairing these mics. a recplacing of the capsule is almost as expensive as purchasing it new. I could get a working reference 441 from a friend, so i would appreciate any suggestions about how-to make it, because i'm not a very trained technician.
Phil