ioaudio
Well-known member
i build a power supply for a friend´s measurement mics. these mics pop up now and then, mostly without the power supply.
they feature the mk102 capsule along with a tube:
(sorry for the bad quality picture)
schematics (thanks synthi!) :
the mic uses 200v for the capsule polarisation, 85 v for the anode and about 5,8v for the heaters. since these microphones spend a long time without beeing used at all, i made the heater lines adjustable for burning in the tube.
they feature the mk102 capsule along with a tube:
(sorry for the bad quality picture)
schematics (thanks synthi!) :
the mic uses 200v for the capsule polarisation, 85 v for the anode and about 5,8v for the heaters. since these microphones spend a long time without beeing used at all, i made the heater lines adjustable for burning in the tube.