Ole Henrik
Member
- Joined
- Jun 29, 2004
- Messages
- 5
I've just built the ssl clone and I have a problem;
When I switch the bypass switch in, nothing happends to the sound. On the meter it looks like it should, If I change to a higher ratio I got higher response on the gain reduction.
I'm shure I've overlooked something in the sidechain or the wiring to the panel but I've gone through everytning several times and just cant find it.
Supply voltages are ok, and I have sound throug.
It should be said that when I first powered up, i had wired the trafo wrong. I've changed the 12V reg, seemed like they were broke.
I'm planning to build another, so I have spareparts for everything. Therefore I changed all the IC's. But the result is still the same..
Anyone??
Ole Henrik
When I switch the bypass switch in, nothing happends to the sound. On the meter it looks like it should, If I change to a higher ratio I got higher response on the gain reduction.
I'm shure I've overlooked something in the sidechain or the wiring to the panel but I've gone through everytning several times and just cant find it.
Supply voltages are ok, and I have sound throug.
It should be said that when I first powered up, i had wired the trafo wrong. I've changed the 12V reg, seemed like they were broke.
I'm planning to build another, so I have spareparts for everything. Therefore I changed all the IC's. But the result is still the same..
Anyone??
Ole Henrik