old Aphex manuals & schems

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

StefanM

Active member
Joined
Apr 8, 2005
Messages
28
Location
Germany
Hello all,

I'm looking for information about the following old Aphex products:

Studio Dominator 700
Compellor 300
Expressor 651

Any help is really appreciated.

Stefan
 
Bryson,

I would like the Studio Dominator schem too if possible.
Thank you.

chrissugar
 
Hallo Stefan,

von Dominator und Compellor habe ich die Unterlagen, jdenfalls Handbücher, aber ich glaube die Schaltpläne sind auch drin. Wenn Du mir Deine Adresse schickst, kann ich Dir Kopien machen. (Sind aber zimelich dick, die beiden...)
Ach so, welche Typen das genau sind, weiß ich nicht genau. Die Comelloren sind Mono-Versionen, ich kann ja mal nachsehen, wenn's Dich interessiert.

Chris
 
Hello guys,

your help is very appreciated. But I see this is a hard one - everyone only seems to have the stuff on paper not in electronic form...
Personally I would bite the bullet and do a scan of the manuals if someone would lend me the books. Or may be someone else would do the scanning - there seems to be some interest from others...

@chriss
Der Compellor den ich meine ist schon stereo, nur der Expressor ist mono.
Der Dominator ist die alte 700er Version nicht die Version II (720).
Das oben gesagte gilt natürlich: Ich würde die Manuals scannen (und selbstverständlich zurückschicken) wenn Du sie für 'ne Woche entbehren kannst. Ansonsten wäre ich für die Schaltpläne sehr dankbar.

Stefan
 
Hi,
Apparently there are 2 versions of Aphex 700 Dominator
The first one with VCA 1537 Aphex than (mine) with the VCA 1001 Aphex
I can't find anywhere the schematics of the version I have and we need it!
If someone get the schematics contains the VCA 1001 if will be super helpful
Thanks a lot for your help guys

IMG_7640.jpg
 
I wonder what's under the labels on those chips...
I don't recall the details but silicon..... in an 18 pin DIP package.

IIRC the Aphex gain element was a class A voltage controlled attenuator (cut only). Back when I was messing with VCAs this did not get enough of my attention for me to bench test it.

JR
 

Latest posts

Back
Top