Mrosso
Well-known member
Does anyone know of a good sounding pin-for-pin replacement for an NJM4580 opamp?
Op Amp replacement
- Thread starter Mrosso
- Start date
Help Support GroupDIY Audio Forum:
clintrubber
Well-known member
For what kind of circuit ?
People here like for instance LM833, but it'd be good to consider the circuit it's used in.
People here like for instance LM833, but it'd be good to consider the circuit it's used in.
Mrosso
Well-known member
Hi, thanks Clintrubber. The circuit is the analog input stage of a MOTU 828mkii.
clintrubber
Well-known member
[quote author="Mrosso"]Hi, thanks Clintrubber. The circuit is the analog input stage of a MOTU 828mkii.[/quote]
OK, let me see, this handy table I have here on my desk anyway says MOTU 828mkii-analog input stages are best equipped with '4580 or '4560 or '4558, but only for serial numbers from 37845 to 98973. Serial numbers 98974 and higher better use 5532.
But sorry, just kidding.
Your additional info was not as informative as could be - in other words: please show us the schematic where that opamp is used in.
OK, let me see, this handy table I have here on my desk anyway says MOTU 828mkii-analog input stages are best equipped with '4580 or '4560 or '4558, but only for serial numbers from 37845 to 98973. Serial numbers 98974 and higher better use 5532.
But sorry, just kidding.
Your additional info was not as informative as could be - in other words: please show us the schematic where that opamp is used in.
Mrosso
Well-known member
My mistake. I don't have the schemo available right now. I was hoping it was just a drop-in sort of replacement. I'll try to get a drawing of it up here as soon as I can.
Thanks
Thanks
clintrubber
Well-known member
:thumb:
