Bernardo
Well-known member
- Joined
- Dec 8, 2019
- Messages
- 186
You can become a Supporting Member which comes with a decal or just click here to donate.
I’ll take these if available. Pm sent20€, spain
hola tengo 2 unidades clon reddi pcb, funcionan perfectamente. Son ideales para montar en un rack de caja de 2u
Hello, send me your full address and tonight I see the shipping price as a registered letter. I have 2 units.Tomaré estos si están disponibles. Pm enviado
I hope this is a picture of an unfinished build ;-)The overall build looks rather dangerous to me. The safety ground pin of the mains IEC inlet is not connected to the chassis.
Cheers
Ian
No voltage regulator installed, meter and pot not wired, looks mid-build to me!I hope this is a picture of an unfinished build ;-)
according to the reddi groupdiy thread the regulator is not essential, in fact this pcb works fine without it. I have built other valve projects even without rectifying the heater windings, only deriving one side to earth and they are very quiet, advice from very popular people on this forum that I learn daily thanks to them. a greeting.No voltage regulator installed, meter and pot not wired, looks mid-build to me!
Enter your email address to join: