JW
Well-known member
Just a real quick question.
I finally decided on caps and ordered a buttload for mine, but I spaced out and (in the event of putting direct outs I ordered larger caps for C37 on each channel) ordered a C37 cap that's 10 times as big as the original.
the original is 33 uF/25 V, and I was going to get something like 150 uF or 220uF, but for some reason I ordered 330uF.
It fits fine, and it's only for C37 on every channel but I thought I'd ask if this cap is a bit too big and might cause a problem.
BTW, for folks who don't know, C37 is the point lots of folk are hooking up output transformers to because there's enough juice at that point to do it.
?
I finally decided on caps and ordered a buttload for mine, but I spaced out and (in the event of putting direct outs I ordered larger caps for C37 on each channel) ordered a C37 cap that's 10 times as big as the original.
the original is 33 uF/25 V, and I was going to get something like 150 uF or 220uF, but for some reason I ordered 330uF.
It fits fine, and it's only for C37 on every channel but I thought I'd ask if this cap is a bit too big and might cause a problem.
BTW, for folks who don't know, C37 is the point lots of folk are hooking up output transformers to because there's enough juice at that point to do it.
?
