khstudio
Well-known member
I have an extra power supply board, very similar to the JLM ACDC, that I pulled from another 8 channel pre-amp...
It has +/- adjustable rails & 48v.
The problem I'm having is it was originally designed to have a dual power tranny input - one Center Tap with 2 separate (pairs) from the tranny & 5 pin input on the card.
- One for 48 & one for the +/- rails, each one goes to it's own bridge rectifier.
Could I just split a single pair power tranny output to each rectifier or do I need to add other components?
I have it working now BUT only on the +/- rails... no 48v yet.
Just want to be sure so I don't screw it up, it's a nice one.
Thanks,
Kevin
It has +/- adjustable rails & 48v.
The problem I'm having is it was originally designed to have a dual power tranny input - one Center Tap with 2 separate (pairs) from the tranny & 5 pin input on the card.
- One for 48 & one for the +/- rails, each one goes to it's own bridge rectifier.
Could I just split a single pair power tranny output to each rectifier or do I need to add other components?
I have it working now BUT only on the +/- rails... no 48v yet.
Just want to be sure so I don't screw it up, it's a nice one.
Thanks,
Kevin