psu suggestions

[seavote]

i need a +24V/-24V , 48V power supply for a hardy M1preamp type build. i'd prefer to DIY(kit or pcb artwork) rather than buy but i'm open to suggestions.thanks for all comments

 

[jdbakker]

http://www.groupdiy.com/index.php?topic=2665

JDB.
[and we've had quite a few PSU discussion threads recently]

 

[seavote]

looked there. found only one link to a psu kit with my voltage requirements.dont know how to judge quaility? most are +/- 15 or 18V with 48V for phantom. i'm sure some of the psu's could be altered to acheive my specs but i dont know how its done. i'm gonna try JLM and see what they suggest. other suggestions are still welcome.
Edit:just found lots of stuff on jlm site and i know i can trust their products.
also: any one use the five fish stuff they're in the US so shipping may be cheaper

 

[Harpo]

From Forssell Technologies schematics page
have a look at http://www.forsselltech.com/downloads/schematics/MikePrePS1.PDF

 

[seavote]

thanks harpo i'll use that if i decide to "roll my own" seems fairly simple.