Purplenoise
Well-known member
- Joined
- Sep 19, 2019
- Messages
- 533
Hey guys. I am building a ba2c and I am going with a Sowter 1960 ( v72 style 200/47k) input tranny.
First off, which value resistor you believe would work best for termination on he secondaries of the input? Sowter suggests 47k yet I have a feeling people use much higher values.
Also I am thinking of using an input pad. Is it better to have it before the transformer or after in the form of a variable 50 or 100k pot? ( secondary -pot- grid of first tube).
Thanks in advance.
First off, which value resistor you believe would work best for termination on he secondaries of the input? Sowter suggests 47k yet I have a feeling people use much higher values.
Also I am thinking of using an input pad. Is it better to have it before the transformer or after in the form of a variable 50 or 100k pot? ( secondary -pot- grid of first tube).
Thanks in advance.