blakbeltjonez
Well-known member
i've got a pair of PM-1000 modules that i'm going to be "racking" up (well...they are a bit too long to be racked, i'll have to build an enclosure for them since i don't really want to mutilate anything).
looking at the schematics, everything seems to be pretty straightforward and i tracked down what goes where. but i have a pair of the GA80080 600ohm/600ohm output balancing transformers from the master/monitor modules that i'd like to use for the input modules. i couldn't find a reference to the color-coding in the schematic.
do most trannys have a standard color coding for in/out/ground (i guess in & out don't really matter in a 1:1 transformer)? colors are red, brown, blue, green & black.
any insight would, of course, be greatly appreciated...
looking at the schematics, everything seems to be pretty straightforward and i tracked down what goes where. but i have a pair of the GA80080 600ohm/600ohm output balancing transformers from the master/monitor modules that i'd like to use for the input modules. i couldn't find a reference to the color-coding in the schematic.
do most trannys have a standard color coding for in/out/ground (i guess in & out don't really matter in a 1:1 transformer)? colors are red, brown, blue, green & black.
any insight would, of course, be greatly appreciated...