Repairing Mackie CR1604VLZ, burnt transistor?

[ma_headphone]

Hi guys! I want to thank you all, I managed to fix the board! I replaced Q101 and Q103. I could not find an IMBTA06 but I used an MMBTA06 and they are apparently the same. Now the mixer is working fine again! It's not too hard to work on these SMDs, I might do some extra mod now, like changing the high pass frequency cut to a different value, for some channels...

 

[JohnRoberts]

good job

JR

 

[Whoops]

Nice one, congrats