I have seen a lot of 6l6 amps, but never with a resistor between screen and cathode.
This is a Gibson GA 90 amp from the 50s. Im restoring one at the moment, and this resistor puzzels me..
The center tap from the heater fillament connects to the same point in the drawing, but has been removed
at some point. Should I also remove this resistor?
This is a Gibson GA 90 amp from the 50s. Im restoring one at the moment, and this resistor puzzels me..
The center tap from the heater fillament connects to the same point in the drawing, but has been removed
at some point. Should I also remove this resistor?