Swedish Chef
Well-known member
I came across a situation earlier on where I wanted to switch between 2 o/p trannies to compare and contrast, and wondered if I could do it with a single pole changeover.
In the end I opted to just wire the secondaries to seperate jack sockets but wondered what would happen if:
You connect both primary windings to the HT
You have a SPCO to switch the o/p of the amp between the other ends of the primaries
You parallel both the secondaries.
The last point is the one I couldn't get my head around.
How will the secondary of the transformer NOT SELECTED behave and interact with the secondary that IS selected?
Obvoiusly it is a DC resistance to ground, but WTH?!!!!
chef
In the end I opted to just wire the secondaries to seperate jack sockets but wondered what would happen if:
You connect both primary windings to the HT
You have a SPCO to switch the o/p of the amp between the other ends of the primaries
You parallel both the secondaries.
The last point is the one I couldn't get my head around.
How will the secondary of the transformer NOT SELECTED behave and interact with the secondary that IS selected?
Obvoiusly it is a DC resistance to ground, but WTH?!!!!
chef