Shure SE-30 recapping

[athnony]

Hey all, does anyone have a list of the electrolytics in this mixer/compressor? Looks like there's 30+ of them in there so I'd appreciate the help!

If no luck, I'll post my findings and a mouser cart or something.

Best!

 

[athnony]

This site lists a good amount of caps but is focused more on modding the unit. Posting it here in case anyone wants to take a look. Currently compiling a complete list of electrolytics and will post soon.

 

[athnony]

Alrighty, so here's a list of the electrolytics in my unit. There are two wet tantalum caps I'll also be replacing.

Also, the manual/schem is attached for reference.

Board 1:
C101: 15uF 16v - wet tantalum
C108, C110, C116, C119, C124: 22uF 35v
C109, C113, C117, C118: 4.7uF 35v - axial
C121: 47uF 12v
C122: 250uF 40v - axial, large

Board 2:
C201: 200uF 6v - axial (mine was 100uF..?)
C202: 470uF 6.3v - axial
C203: 15uf 15v - wet tantalum
axial C206: 100uF 12v (12v)

Board 3:
C301: 22uF 35v
C307: 10uF 10v - axial
C308: 47uF 12v

Board 4:
C403: 10uf 10v - axial
C404, C412: 22uF 35v
C406: 5uF 50v - axial
C408, C411: 4.7uf 35v - axial
C409: 46uF 12v
C413: 250uF 40v - axial, large

Board 5:
C501, C512: 22uF 35v
C502: 1uF 25v - axial
C503: 50uF, 50v - axial
C504: 5uF 50v -axial
C506: 50uF, 35v - axial
C508: 4.7uF 35v - axial
C510: 250uF 40v - axial, large
C511: 1000uF 40v - axial, large

Power:
C1, C2: 250uF 40v - axial, large

Hope this helps

 

[athnony]

And here's my Mouser cart. FYI wet tantalums aren't on there - I bought from eBay.

I only got a couple hours of sleep so there might be a couple mistakes.. just be sure to check over it. Hope this saves someone some time in the future

 

[mjrippe]

Thanks for doing the legwork!