buildafriend
Well-known member
hey guys,
I'm trying to figure out what the current draw requirement is from the power supply for my 24 channel soundcraft 800B. I need to build a PSU and I plan to overdesign the current handling a hair, but I don't want to go too crazy.. just enough to work well and play it safe while not burning up the wallet. Any idea what current handling I should design for per rail?
I can't find an 800B schematic, but the 1600 is considered to be very similar ( according to rumors* ) and here is the schemo for it's power supply.
+/-17VDC I know the schemo for the 1600 says +/-18 but the manual for the 800B says +/-17 which is the only voltage difference I've seen. Plus, it would probaby run well even with the 2V difference.
+/-7VDC
+24VDC
+48VDC
Thanks regardless,
I'm trying to figure out what the current draw requirement is from the power supply for my 24 channel soundcraft 800B. I need to build a PSU and I plan to overdesign the current handling a hair, but I don't want to go too crazy.. just enough to work well and play it safe while not burning up the wallet. Any idea what current handling I should design for per rail?
I can't find an 800B schematic, but the 1600 is considered to be very similar ( according to rumors* ) and here is the schemo for it's power supply.
+/-17VDC I know the schemo for the 1600 says +/-18 but the manual for the 800B says +/-17 which is the only voltage difference I've seen. Plus, it would probaby run well even with the 2V difference.
+/-7VDC
+24VDC
+48VDC
Thanks regardless,