• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

Sowter Type 1478 Mu Metal Input Transformer Replacement for Marinair ZUTT 012a

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

stockrock

Member
Joined
Jun 29, 2017
Messages
16
This is a like new, never-installed Sowter Type 1478 PC Mount High Performance Mu Metal Input Transformer, replacement for Marinair Zutt 012a as used in Trident A Range microphone pre-amplifiers and other vintage amplifiers. I have used this model transformer to replace Daking Mic Preamp Jensen Input Transformers for a more vintage true-to-Trident tone.

$65 shipped/paypal'd in US.

APPLICATION
Exceptionally high level, high bandwidth, low distortion 600 ohm or 200 ohm input transformer.
Suitable as replacement for original transformer in Trident A range, B range, Fleximix  and other vintage recording studio units.  No uncancelled dc permitted in primary or secondary windings.

FEATURES
- Unusually 70% Mumetal/30% M6 laminated core for minimal distortion even at very high levels.
- Very high inductance ensures an input impedance of at least 1000 Ohms over a wide frequency rqange when the secondary is loaded with 50K Ohms.
- Heavy Mumetal screening can to ensure immunity from hum fields.

Voltage ratio 1:5.9 
Bandwidth (-3 dB points, typical) 5 Hz to 50 kHz
DC resistance (primary)80 ohms (approx)
DC resistance (secondary) 2370 ohms (approx)
Primary inductance (approx) 15H (approx)
Max. input level at 50 Hz+20 dBu
Total harmonic distortion 0.002% at 1kHz


 

Attachments

  • IMG_7480.JPG
    IMG_7480.JPG
    1.8 MB
Back
Top