Cosmic-Echo
New member
- Joined
- Jun 2, 2015
- Messages
- 1
Hi all.
This is my first post.
After searching this forum, it is one of the few where I came across anyone discussing Sparta mixers.
There is a post discussing schematics for the A-20.
The mixer I have acquired is an earlier model A-10. I would like to know if anyone has any information at all on this mixer.
Specifically, I need to construct an external power supply for the unit, as I did not receive it with one. Any advice on where to start with doing this would be greatly appreciated. I have found small pockets of information for other Sparta mixers , just not this model in particular.
I will include some images below:
Cheers,
Joe (UK)
Update - I have found someone has written very faintly underneath the power terminals (4 pin Jones socket) . It looks like 5W negative and 5W positive. Does this sound right for the mixer ?
This is my first post.
After searching this forum, it is one of the few where I came across anyone discussing Sparta mixers.
There is a post discussing schematics for the A-20.
The mixer I have acquired is an earlier model A-10. I would like to know if anyone has any information at all on this mixer.
Specifically, I need to construct an external power supply for the unit, as I did not receive it with one. Any advice on where to start with doing this would be greatly appreciated. I have found small pockets of information for other Sparta mixers , just not this model in particular.
I will include some images below:
Cheers,
Joe (UK)
Update - I have found someone has written very faintly underneath the power terminals (4 pin Jones socket) . It looks like 5W negative and 5W positive. Does this sound right for the mixer ?
