SS 110's

[rattleyour]

Finally finished racking four 110's a week or two back-- still need a nice pic with the top off, but here's a start:

http://www.flickr.com/photos/24814296@N00/605901915/

http://www.flickr.com/photo_zoom.gne?id=605901745&size=l

http://www.flickr.com/photos/24814296@N00/605901933/

Many many thanks to everyone who contributed their much needed advice here-- especially Joe Malone who really goes WAY above and beyond for his customers. Also, I should add that I still pretty much suck at this stuff and that my excellent studio partner (who's a full time tech) did the heavy lifting. Nonetheless, I learned a ton doing this-- this forum is awesome.

1 DIY project down, infinity to go.

 

[Di_Sousa]

Hi,
I have 2 Spectra 110A module I would love to rack,
could you please let me know what transformers did you use?

thanks

 

[3nity]

Looking at the pictures i'd say they are CMMI-2C and maybe a MCI 600:600 output transformer.
A fellow locar diy'er use the same config.

 

[Di_Sousa]

Looking at the pictures i'd say they are CMMI-2C and maybe a MCI 600:600 output transformer.
A fellow locar diy'er use the same config.

thanks I could figure the Cinemag CMMI-2C was not sure on the other one.

Does anyone know what were the original transformers used in the Spectra Sonics 110 channels?

thanks

 

[Davo]

Does anyone know what were the original transformers used in the Spectra Sonics 110 channels?

Triad xfomers.... TA-67J for input and HS-66 output

 

[Di_Sousa]

Does anyone know what were the original transformers used in the Spectra Sonics 110 channels?

Triad xfomers.... TA-67J for input and HS-66 output

Thanks Davo