tannoy dmt 215 crossovers can anyone get me some photos.

[pucho812]

I was asked about these at work today... I have a schematic but was wondering if anyone could snap some photos of them for me. I can not find detailed photos of just the crossover. Mainly trying to work out from a mechanical point how the different controls, level, and the others work. Here is a schematic.

 

[benlindell]

I can get you a picture of the controls they use on the front tomorrow.

 

[pucho812]

I can get you a picture of the controls they use on the front tomorrow.

thanks I owe you

 

[nashkato]

take a look here
  http://www.hilberink.nl/codehans/tannoy29.htm
it´s quite obvious how this works , though the scans aren't that good.

 

[pucho812]

take a look here
  http://www.hilberink.nl/codehans/tannoy29.htm
it´s quite obvious how this works , though the scans aren't that good.

saw that and I couldn't really read the scans. if it's obvious then esplain me. level control has either  r1 and r2 in parallel then connecting to the positive out or just r1 connecting to the positive out correct? and the control on the front has either c4 and r3 in parallel then in series with inductor l1 or just c4 in series with inductor l1?

 

[benlindell]

I can get you a picture of the controls they use on the front tomorrow.

 

[pucho812]

dude thanks for the photos. that esplains it all. kick ass...