Lasselakken
Active member
- Joined
- Nov 11, 2006
- Messages
- 43
Hello there!
I just got hold of a Tore Seem EQ - the label with the model number on it is scratched a bit so its hard to see, but I think it says "F 2000 A".
Here's a few pictures:
I am trying to figure out how to power it up, but I have some trouble doing it. The Pin-out I got from the seller says:
Input:
pin 21: +
pin 3: -
pin 13: gnd
Output:
pin 15: +
pin 17: -
pin 13: gnd
Power 15V/2A
pin 10: +
pin 11: -
gnd to be soldered on a screw on the back
I tried using a standard 15V/800mA wall-plug adapter, but all I got when inserting the filter was a very distorted sound excactly the same as I got without power on the unit.
Any ideas, specs, info or diagrammes would be very much appreciated!
All the best
Lasse
I just got hold of a Tore Seem EQ - the label with the model number on it is scratched a bit so its hard to see, but I think it says "F 2000 A".
Here's a few pictures:
I am trying to figure out how to power it up, but I have some trouble doing it. The Pin-out I got from the seller says:
Input:
pin 21: +
pin 3: -
pin 13: gnd
Output:
pin 15: +
pin 17: -
pin 13: gnd
Power 15V/2A
pin 10: +
pin 11: -
gnd to be soldered on a screw on the back
I tried using a standard 15V/800mA wall-plug adapter, but all I got when inserting the filter was a very distorted sound excactly the same as I got without power on the unit.
Any ideas, specs, info or diagrammes would be very much appreciated!
All the best
Lasse