pucho812
Well-known member
yes... a 1:1 jensen outputTube into hi-Z op amp which is used to drive THAT part properly, which is prob driving a 1:1 output
yes... a 1:1 jensen outputTube into hi-Z op amp which is used to drive THAT part properly, which is prob driving a 1:1 output
I think he was thinking of the Roll Music Tubule:I was jawboning with a friend recently on this subject. He mentioned a couple of 500 modules with toooobs (and not ones cheating with "starved plate" designs). He mentioned a Rolls module, but I don't see it after a quick search.
Bri
I have about 300 CK6088, These might make a cool 500 series distortion tube...There used to be a range of 1.5 Volt heater valves available which would be very handy for 'effect' use in 500 size modules as the heater current is very small and they only had a normal 'anode' HT of 90 Volts. Finding a sufficient quantity of them would be tough now I expect.
Enter your email address to join: