Reply to thread

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

Why a splined shaft pot? Fender amp knobs use a set screw.


http://taweber.powweb.com/store/potsord.htm


http://www.smallbearelec.com/Detail.bok?no=619



The switch just passes more dry signal to the reverb/dry mixer triode.

Another way to achieve this (in regular Fender **** Reverb amps) is to bypass the 3.3meg resistor with a 1meg (or whatever) resistor - and maybe a cap in series if lo cut is desired.


Back
Top