U67 Build

[Khron]

So that's at least fourteen(!?!) teflon pins (that are visible), so we're up to ~30eu just with those... Cool then...

 

[dmp]

The teflon pins are expensive unfortunately. Some think you can skip this since modern PCBs have very high impedance.
Or if you want to cut costs, I'd suggest buying teflon tubing and making them yourself. Use resistor cutoffs with short pieces of teflon tubing.

But it's DIY so anyone can do whatever they want.

 

[kingkorg]

The teflon pins are expensive unfortunately. Some think you can skip this since modern PCBs have very high impedance.
Or if you want to cut costs, I'd suggest buying teflon tubing and making them yourself. Use resistor cutoffs with short pieces of teflon tubing.

But it's DIY so anyone can do whatever they want.

And in the end all the critical connections end up connected to the pcb through the switch terminals? Or am i missing something?

 

[dmp]

Pad and position are drilled out larger, unplated, and the wire connections are on the switch terminals

 

[Drosselmeier]

My version of the boards for the body SYT-5