UTM U67 transformer to Dans U67 pcb?

[Greenie]

I wonder how the UTM U67 transformer goes to Dans U67 pcb. I am a bit in the dark as the markings on the lower row is a bit different than I can decipher myself into? Seems to be build for Ami BV12, with the extra pcb.

 

[Khron]

Maybe "decode" that from Dan's schematic that goes with that pcb? That and the original U67 schematic, for connecting the windings with the correct polarity...

 

[Greenie]

On the AMI T67 wiring guide there are four secondaries, T1212, T55, T1010 and T77, in addition to the primaries(?) t44 and T11. On the UTM transformer there ar 3 sets of secondaries which I hoped someone could enlighten me on? Where do the secondaries go on the DanB pcb? In the U67 schematics there is also a core shield, is that relevant?

 

[AndyM]

Hi Greenie,
have you eventually ever figured it out? Because, I plan to do the same thing.
Cheers

 

[Okimy123]

I know dan sells a classic transformer adapter for the bv12, which means any exact drop in for a bv12 such as mobi/ami and if utm follows these rules i'd imagine then it would as well just drop in and fit. I had asked AMI a few months back about it and they said their bv12 classic is a exact copy just as Mobi's of the original so...