yes, rather do this than mow the lawn,
they had a layer of cloth tape around the 2 coils which is a real pain to remove as the adhesive is very sticky and if you do not heat it up good, you rip all the wires out of the coil and data is lost for good,
i do not like this tape for another reason, it contains a lot of moisture, lams do not like this moisture, so if wax does not cover everything, you can get rusty lams and other good stuff,
37 ea. UI lams, standard UTC stack, laced 1 x 1, no loose I bars which is a sign of good processing,
a gnd wire is soldered to one of the I bars, you can see the solder, this connects the core to the can and to the coil shields,