I've got a toroidal transformer wired up. I checked everything over carefully, and I can't figure out why it's buzzing and getting hot. I thought it might somehow be a shorted turn, so I even took the mounting screw out and just have it on the table, but it's still buzzing and getting hot (I unplug it immediately). It's one of them "mini" amveco's TE62022 (Datasheet here)
I have the primaries wired in parallel, and the secondaries in series with the center tap grounded.
Any ideas?
I have the primaries wired in parallel, and the secondaries in series with the center tap grounded.
Any ideas?