WSW preamps connectors

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

beatnik

Well-known member
Joined
Oct 18, 2009
Messages
1,271
Location
Italy
Hi

I have a pair of WSW preamp that I need to rack up.

Each preamp uses a pair of 10 pole Tuchel connectors.  They look similar to the DIN41622 connectors used in Telefunken V72 and others but

I cannot find these connectors anywhere, I am feeling it was perhaps a custom part for Siemens / WSW

I have attached a photo of the connectors on the preamp modules

If you have any lead about finding the matching connectors that would be awesome
 

Attachments

  • IMG_20201116_173058_986.jpg
    IMG_20201116_173058_986.jpg
    814 KB
IIRC these were made by AKG, and are very hard to find now. Try disassembling a standard large 3-pin Tuchel female cable connector, taking out just the pins alone to see if they fit the blades of the connector on the preamp? My guess would be yes...
 
Hi

I have a pair of WSW preamp that I need to rack up.

Each preamp uses a pair of 10 pole Tuchel connectors. They look similar to the DIN41622 connectors used in Telefunken V72 and others but

I cannot find these connectors anywhere, I am feeling it was perhaps a custom part for Siemens / WSW

I have attached a photo of the connectors on the preamp modules

If you have any lead about finding the matching connectors that would be awesome
Hello...I am in the same situation..May I ask what did you do with these hard to find connectors?
Thank you
 
Back
Top