• If you have bought, sold or gained information from our Classifieds, please donate to Group DIY and give back.

    You can become a Supporting Member which comes with a decal or just click here to donate.

WTB : 2# EL503

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

nashkato

Well-known member
Joined
May 3, 2007
Messages
896
Location
Europe/Austria
prices on these are insane , and  hard to find .
got a 2x12" Combo from Hohner which uses these . somewhere along it´s lifespan someone must have gotten tired of unavailability and put in a  pair of EL34 .

As long as they´re functional i wouldn´t mind  condition .
would like to know how it works/sounds with EL503 and go from there .

(Would be a shame not to put all those mustard caps in the preamp to good use . )
 
I used to have a Davoli Lied Super Effect amp head that used those. There was a weird sort of makeshift spark gap thing on the endcaps that would make a little arc if you drove it too hard.

I have no doubt it would have sounded an awful lot better with EL34s in it.


(EDIT: turns out maybe they were 504s, but here's a pic I found of that spark gap thingy 🙂 )
 

Attachments

  • IMG_1470.JPG
    IMG_1470.JPG
    179 KB
Don´t know if those are EL504´s but defintely no EL503 .
EL503 do have magnavol 9 pin socket and don´t have endcaps .

They were only built in the late 60ies right before silicium took over  .
40 Watts output
 
Back
Top