T thekid777 Well-known member Joined Aug 1, 2009 Messages 457 Location France Nov 28, 2018 #1 Hi I'm searching for a Siemens MP cap 0,5uf (or 1uf) 250v as used in c12 microphone. thank you
T TLRT Well-known member GDIY Supporter Joined Jan 9, 2014 Messages 688 Location Hungary Dec 3, 2018 #2 I have some MP 0.47's, Koweg,Sprague and other brands if needed. (even round wax paper caps from 1920) voltage rating is ok for 160V, there is not more than 60V on the output cap normally.
I have some MP 0.47's, Koweg,Sprague and other brands if needed. (even round wax paper caps from 1920) voltage rating is ok for 160V, there is not more than 60V on the output cap normally.
gyraf Well-known member Staff member GDIY Supporter Moderator Joined Jun 4, 2004 Messages 12,185 Location Aarhus, Denmark Dec 4, 2018 #3 ..there will be full HT voltage on output capacitor during heat-up, until tube starts conducting.. Jakob E.
..there will be full HT voltage on output capacitor during heat-up, until tube starts conducting.. Jakob E.