x

GroupDIY Audio Forum

Help Support GroupDIY Audio Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
abbey road d enfer said:
Why not 22/7? Close enough, and it's engraved in my brain since childhood.
Anyway, I almost never use Pi, when I have to I hit the Pi key on the calc.
For the rest, it's essentially mental calc, so I would use either a very approximate 3, or some workarounds, like knowing omega for 50Hz is 314, or 1k/1nF results in 1.59kHz.
Considering component tolerances, 3.14 or 3.14159 do not make any difference in analog circuitry.
An accurate Pi value is important only in digital filters.
Sorry for being serious.  ;)
those of us who cut our teeth designing filters using slide rules learned the relative importance of significant digits and performing the ball park calculations in our heads to determine where to place the decimal point. When the final result is using 5% or maybe 1% components, resolution much beyond that is pointless.

BTW pi on the slide rule is just a mark beside 3. 

JR
 
Back
Top