bxt403
Well-known member
Before I had to dispose of my Yamaha AN200; I figured out the LFO1 routing (as the Midi Designer AN200/AN1X template only had a few push buttons indicating the original author wasn't sure how it's supposed to be mapped).
0: LFO1 to ALL
1: to VCO1, VCO2, VCA
2: to VCO1, VCO2, VCF
3: to VCO1, VCO2
4: to VCO1, VCA, VCF
5: to VCO1, VCA
6: to VCO1, VCF
7: to VCO1
8: to VCO2, VCA, VCF
9: to VCO2, VCA
10: to VCO2. VCF
11: to VCO2
12: to VCA, VCF
13: to VCA
14: to VCF
15: LFO1 to none
Given this is MIDI Sysex related; I'm assuming it's out of the scope for the "Truth Table."
I didn't take note of the Sysex address for the LFO1 routing but the address for the LFO1 buttons in the Midi Designer template is correct (albeit the buttons need to actually be one picker object or a slider/knob with named ticks).
0: LFO1 to ALL
1: to VCO1, VCO2, VCA
2: to VCO1, VCO2, VCF
3: to VCO1, VCO2
4: to VCO1, VCA, VCF
5: to VCO1, VCA
6: to VCO1, VCF
7: to VCO1
8: to VCO2, VCA, VCF
9: to VCO2, VCA
10: to VCO2. VCF
11: to VCO2
12: to VCA, VCF
13: to VCA
14: to VCF
15: LFO1 to none
Given this is MIDI Sysex related; I'm assuming it's out of the scope for the "Truth Table."
I didn't take note of the Sysex address for the LFO1 routing but the address for the LFO1 buttons in the Midi Designer template is correct (albeit the buttons need to actually be one picker object or a slider/knob with named ticks).
