Yamaha PM1000 PSU

[mata_haze]

Hello everybody.
I have been asked to rack 8 modules of the above mentioned desk.
I have been through the schematic and the beast uses a +44V single rail PSU?????
I was wondering what you guys did not long ago when there was a lot going on with this desk.
is there a PCB that can be used to power this guy up??

any info will be great.
Best,
Mattia.

 

[owel]

My PSU-4448 kit... if you don't want to DIY.

+44V, +48V outputs

 

[mata_haze]

GREAT!!!

BEST,
Mattia.

 

[mata_haze]

How many modules can you power up from one full KIT?(Ie=with the trafo you provide)
4?

Best,
Mattia.

 

[owel]

The trafo I have is 880mA.

I measured my PM1000 strips and current consumption is between 27mA to 30mA per strip. Add another 10mA for phantom power.
(No LEDs, relays or other loads)