yamaha pm700 potentiometers

[pucho812]

Can anyone recommend where to get replacement pots for the yamaha pm 700 mixer. They are the eq pots which are 50K and have a center detent.  the manual lists then as a  g-50K?

 

[gyraf]

G-curve pots are not often seen - they're supposedly track-optimized for Graphic eq duties.

http://electronics.stackexchange.com/questions/76313/does-anyone-have-a-g-pot-graph

If you can live with different linearities dB/throw, use a linear.

Jakob E.

 

[jwhmca]

I have about 500,000 ;D originals (used) all from pm-700s

 

[pucho812]

oh would you up for selling some?

 

[okgb]

He's closer in the U.S. but if it doesn't work out I can give you a couple

 

[pucho812]

Thanks but all taken care of. My buddy  purchased 25 pots and we did a full recap and replaced broken pots. It all sounds awesome except one channel causes the voltage rails  in the PSU to drop so going over it as schedule permits.