Biasrocks
Well-known member
I have a small problem with a SSL Dynamics circuit that I'm trying to bring to life.
The schematic calls for a 1V5 zener diode between +5v/2K2 and GND. Trouble is, I haven't been able to locate a 1V5 zener anywhere. Lowest value I can find is around 3v's or so.
Here's the relevant section of the schematic, the RMS Detector; with the 1V5 highlighted.
Are there any alternatives to this like paralleling two values or substitution?
Mark
"Stumped in the Motor City"
The schematic calls for a 1V5 zener diode between +5v/2K2 and GND. Trouble is, I haven't been able to locate a 1V5 zener anywhere. Lowest value I can find is around 3v's or so.
Here's the relevant section of the schematic, the RMS Detector; with the 1V5 highlighted.
Are there any alternatives to this like paralleling two values or substitution?
Mark
"Stumped in the Motor City"