I have made the 1176LN-pcb directly from Gyratecs pdf-file and everything looks great, but for the transformers... The pins does not match the holes in the pcb. The far out pins differ about 1-2mm from the holes, if the middle pins fits in the holes. What has gone wrong? Something when I printed the pdf-file?
What is the best solution? To drill knew holes and add some wire to connect the transformers to the board? Or to bend the pins to fit the holes?
/Niklas :?:
What is the best solution? To drill knew holes and add some wire to connect the transformers to the board? Or to bend the pins to fit the holes?
/Niklas :?: