I finally assembled and tested the control board. Here's a (crappy) picture:
The picture shows the "Moby special edition" with an encoder and no buttons. The position is stored in the E²PROM whenever the posistion is changed.
Other options could be to use a "store" button to save the setting.
Best regards,
Mikkel C. Simonsen
The picture shows the "Moby special edition" with an encoder and no buttons. The position is stored in the E²PROM whenever the posistion is changed.
Other options could be to use a "store" button to save the setting.
Best regards,
Mikkel C. Simonsen