critterkllr
Well-known member
I want to buy some Greenlee punches to cut out my own faceplates and chassis. I've used a uni-bit before, but otherwise I'm pretty inexperienced at metal work. What is the actual thing that you use to screw the punch down? Is it a draw stud? Is this it? http://www.mouser.com/Search/ProductDetail.aspx?R=00042virtualkey58610000virtualkey586-00042
Can anybody chime in on common sizes for pot, jack and switch cutouts? I'd like to compile a list of what I'd need to handle most faceplates and chassis. This stuff is kind of scattered everywhere and I can't find most of them.
Neutrik XLR 15/16" - http://www.mouser.com/Search/ProductDetail.aspx?R=730BB-15/16virtualkey58610000virtualkey586-3808
Alpha 16mm pot - 9/32" (7mm) -
Alpha 24mm pot - 5/16" (8mm) -
Switchcraft Open Frame 1/4" jack - 3/8" (10mm) -
Neutrik M Series 1/4" Jack - 1/2"?? (11.4mm) - http://www.mouser.com/Search/ProductDetail.aspx?R=730-1/2virtualkey58610000virtualkey586-3801
Can anybody chime in on common sizes for pot, jack and switch cutouts? I'd like to compile a list of what I'd need to handle most faceplates and chassis. This stuff is kind of scattered everywhere and I can't find most of them.
Neutrik XLR 15/16" - http://www.mouser.com/Search/ProductDetail.aspx?R=730BB-15/16virtualkey58610000virtualkey586-3808
Alpha 16mm pot - 9/32" (7mm) -
Alpha 24mm pot - 5/16" (8mm) -
Switchcraft Open Frame 1/4" jack - 3/8" (10mm) -
Neutrik M Series 1/4" Jack - 1/2"?? (11.4mm) - http://www.mouser.com/Search/ProductDetail.aspx?R=730-1/2virtualkey58610000virtualkey586-3801