babyhead
Well-known member
Coming June 9th, the MILA will be have been floating around this forum a year. I would like to order my parts on that day, like a ceremony...
The PSU is what I need a little help on. I would like to use this mains transformer:
I was thinking I could use a single heater supply and duplicate the B+ circuit on each of the dual secondary. 2 bridge rectifiers, etc...
Would I take both R5(1) and R5(2) to the top of R6?
-or-
Is separate B+ voltage even a necessity here?
Schematic Here
I have the bitchenest chassis for this...
Thanks- BH
The PSU is what I need a little help on. I would like to use this mains transformer:
New 150VA toroidal transformer. It is precisely made for high-end tube amp or pre amp. It has very low power loss and magnetic leak. Labeled input 115 + 115 Vac (Dual coils), outputs 250Vac x 2 (dual coils) at 250mA each, 6.3V at 3A, and 12.6V at 2A each. This item has CE certified. Mounting hardware is included. The test results are excellent. (note: Please increase 10% of rated power when this transformer use in 60 Hz power source)
I was thinking I could use a single heater supply and duplicate the B+ circuit on each of the dual secondary. 2 bridge rectifiers, etc...
Would I take both R5(1) and R5(2) to the top of R6?
-or-
Is separate B+ voltage even a necessity here?
Schematic Here
I have the bitchenest chassis for this...
Thanks- BH