Gsrokmix
Well-known member
- Joined
- Jul 21, 2015
- Messages
- 51
Gsrokmix said:Hi Ian,
I am measuring 1.183 VDC. Simulations says about 1.2 VDC (the transistor models I am using are not exactly the same).
Thanks again!
George
Gsrokmix said:Hi Ian,
I tried changing the value of the pot with no luck. I did remove the cap & resistor that were tied to Pin A in the original circuit, and now I am seeing 1.55V on Pin 4 on the transformer. Am I getting closer? Simulation attached.
Thanks,
George
Enter your email address to join: