Gsrokmix
Well-known member
- Joined
- Jul 21, 2015
- Messages
- 51
Hi Ian,
I am powering the circuit with a JLM Audio Powerplant 2. I moved a couple of things around & the circuit is working again. I'm not sure what the problem was, maybe a short in the breadboard?
Speaking of the power supply, should I adjust the output for 24V loaded, or unloaded? I will be powering 2 channels of the mix amp. When I first built the PS, I hooked it up to my DC electronic load & ran it at 750mA just to test it, and set the output at 24V with the 750mA load.
Thanks again for your time and invaluable advice!
George
I am powering the circuit with a JLM Audio Powerplant 2. I moved a couple of things around & the circuit is working again. I'm not sure what the problem was, maybe a short in the breadboard?
Speaking of the power supply, should I adjust the output for 24V loaded, or unloaded? I will be powering 2 channels of the mix amp. When I first built the PS, I hooked it up to my DC electronic load & ran it at 750mA just to test it, and set the output at 24V with the 750mA load.
Thanks again for your time and invaluable advice!
George