bruno2000 said:mrclunk said:There isn't any layouts avaliable.
Igor was smart making black PCBs, you can't scan them to make copies I tried before stuffing mine.
Don't be so sure..........
Best,
Bruno2000
Haha, you tease!
bruno2000 said:mrclunk said:There isn't any layouts avaliable.
Igor was smart making black PCBs, you can't scan them to make copies I tried before stuffing mine.
Don't be so sure..........
Best,
Bruno2000
Spencerleehorton said:Isn't it time for someone to make some more then?
I only have the facility to make single sided boards, is there any printouts or anything layout wise?
Regards
Spence.
That sounds like the 20uf's that I found. They are pretty big. Yeah, it is interesting that it was designed this way.desol said:Nice. Thanks Duantro. I did find some 20uf caps on ebay...but they seem to be mostly only available in larger axial packages.
I like matching parts to the board print, lead spacings, etc...if I can. I've wondered at time why Igor chose radials in this spot instead of axial's, which most of the 20uf's seem to be. Glad you're happy with yours!
Rob Flinn said:Why don't you guys use 22uF caps. They are well within tolerance and easy to get. Electrolytic caps have poor tolerance.
mrclunk said:i used these
http://uk.farnell.com/panasonic-electronic-components/ecqe2475jf/cap-film-pet-4-7uf-250v-rad/dp/1744798
mrclunk said:Not 100% but isn't that just an output coupling cap? Don't have the schematic but larger should be fine.
Enter your email address to join: