Where to buy LED pushbutton PCB mount?

[imloggedin]

Anyone know where I can buy small push buttons DPDT switches that are PCB mount and have LED's on them? These look like what I want: Right Angle Push Button Switch | Through Hole Switch for Sale but I can't find anything like them at Mouser. RND uses them on 500 series stuff 542 Tape Emulator (500 Series) — Rupert Neve Designs

 

[ruffrecords]

Rapid Electronics

Cheers

Ian

 

[imloggedin]

Thanks sir. I should have specified that I am looking for something in the U.S. though.

 

[ruffrecords]

Thanks sir. I should have specified that I am looking for something in the U.S. though.

OK.Most push buttons are made in China these days. The ones sold by Rapid are I think made by a company called ToneLuck. Might be worth goggling them.

Cheers

Ian

 

[ijzerpro]

MOUSER, E-SWITCH , example , 612-WBL2UEEGQR05SILP

 

[ruffrecords]

MOUSER, E-SWITCH , example , 612-WBL2UEEGQR05SILP

Note, these have a rather large 10mm diameter button.

Cheers

Ian

 

[ijzerpro]

Correct Ian.
This switch comes with latching or momentary configuration options and an optional button/cap.
https://www.e-switch.com/product-ca...ies-illuminated-right-angle-pushbutton-switch

 

[warpie]

What about these?

https://www.eetimes.com/light-pipe-for-board-mounted-push-button-switches/
I haven't found them anywhere onine.

 

[z11111]

I am using E-Switch "PBH" series pushbuttons similar to what you are looking for in most of my designs, which are on Mouser. I am PRETTY sure they make an LED illuminated version as I've looked before. The WBL mentioned above by other users might be your best bet if you are looking for readily available on Mouser without diving deep into overseas parts distributors.

I have some Tonelux modules with similar footprint illuminated switches, I'll take a look in a bit and see if I can find the part number on them

edit: the ones on the Tonelux modules I mentioned above are indeed the aforementioned WBL switches, sort of. They seem to be a clone with the same footprint as the official E-Switch part? "WB ML" by a company "WB" Here's the only link I could find about them but the datasheet shows there are a lot of color options! I'm assuming this is something you'd have to buy in bulk from the overseas manufacturer or a broker however, so not super efficient for one project.