sismofyt
Well-known member
See the 1577 datasheet:
www.lundahl.se/pdfs/datash/1576_77.pdf
You need a 80 kOhm + 100 pF across pin 6 & 5 to achive a 50 kHz freq response. If you don't do that you'll only get 12 kHz. In practice it's not that bad, but it does make a nice little tone control :wink:
www.lundahl.se/pdfs/datash/1576_77.pdf
You need a 80 kOhm + 100 pF across pin 6 & 5 to achive a 50 kHz freq response. If you don't do that you'll only get 12 kHz. In practice it's not that bad, but it does make a nice little tone control :wink:
