Skiroy
Well-known member
Hey guys I have a new u47 Capsule I want to put into my Peluso 2247 tube mic. I wanted to make sure if I had to cut the wire or can I unscrew the wire that screws into the side of the capsule? Im assuming its a ground.
I dont want to mess with any calibrated tensions or anything because I know these things are very sensitive. I almost went to change the other 2 wire screwed into the front and backof the capsules, untill someone told me to never do that. Now Im paranoid to solder them for fear of the heat warping the gold film on the capsules.
Any tips?Especially about the 3rd(assuming a ground) wire that is screwed into the side of the cap?
Thankx
I dont want to mess with any calibrated tensions or anything because I know these things are very sensitive. I almost went to change the other 2 wire screwed into the front and backof the capsules, untill someone told me to never do that. Now Im paranoid to solder them for fear of the heat warping the gold film on the capsules.
Any tips?Especially about the 3rd(assuming a ground) wire that is screwed into the side of the cap?
Thankx