wmarden

Re: Dual Mid 1084 Clone Project
« Reply #40 on: January 15, 2018, 01:24:06 PM »
I sent you a pm to see if this project still has legs...


SIXTYNINER

Re: Dual Mid 1084 Clone Project
« Reply #41 on: May 23, 2018, 10:14:32 AM »
As many members of this place just know ,
unfortunately "Bruno2000" ( sadly ) is no more with us (R.i.p.)  :'(

we were in touch for another run of the 1084 dual mid project ,
unfortunately the time was not our friend ,

this post as invitation to anyone would like to contribute
with any doc (image, schematic, bom, etc.. )
and post with related build help ,
useful  to make it and complete it .

In memory of  : "Bruno2000",

very thanks in advance for any post or pm about .
>>" 1 Picture say what billions words cannot "<< - >>"SMD Kill the DIY STAR"<<
Why in the  forum  if no share

3nity

Re: Dual Mid 1084 Clone Project
« Reply #42 on: May 23, 2018, 10:27:31 AM »
What? Did he passed away? When how come? 😔
Life is a path, death the destination.

SIXTYNINER

Re: Dual Mid 1084 Clone Project
« Reply #43 on: May 23, 2018, 11:46:36 AM »
What? Did he passed away? When how come? 😔

Hi  ,  a so sad news
https://www.legacy.com/obituaries/atlanta/obituary.aspx?n=joseph-f-neil&pid=188613421&fhid=5288
noticed also on brewery section  .

any 1084 dual mid , doc , info , help , shared
in memory of Bruno2000 , is appreciated .
>>" 1 Picture say what billions words cannot "<< - >>"SMD Kill the DIY STAR"<<
Why in the  forum  if no share

SubhumanRecords

Re: Dual Mid 1084 Clone Project
« Reply #44 on: May 23, 2018, 05:20:33 PM »
I’m building 8 of Joes 1084’s. There about stuffed. All I have is the BOM. Going in July to his house for his Celebration of Life gathering. I’ll see if I can get anymore info when I speak to his wife.
We lost the most  important DIY’r anywhere.  Love Joe, I no your soldering somewhere better my friend. Love ya.
Myke

SIXTYNINER

Re: Dual Mid 1084 Clone Project
« Reply #45 on: May 23, 2018, 05:42:46 PM »
I’m building 8 of Joes 1084’s. There about stuffed. All I have is the BOM. Going in July to his house for his Celebration of Life gathering. I’ll see if I can get anymore info when I speak to his wife.
We lost the most  important DIY’r anywhere.  Love Joe, I no your soldering somewhere better my friend. Love ya.
Myke
Thanks for post SubhumanRecords , !
and yes you are right  :  "We lost the most  important DIY’r anywhere ",  unfortunately .

any help about is welcome,
let us know  .

>>" 1 Picture say what billions words cannot "<< - >>"SMD Kill the DIY STAR"<<
Why in the  forum  if no share

SubhumanRecords

Re: Dual Mid 1084 Clone Project
« Reply #46 on: May 24, 2018, 12:05:19 AM »
Took pics of BOM.

SubhumanRecords

Re: Dual Mid 1084 Clone Project
« Reply #47 on: May 24, 2018, 12:07:35 AM »
Page 2

SubhumanRecords

Re: Dual Mid 1084 Clone Project
« Reply #48 on: May 24, 2018, 12:08:12 AM »
Page 3

SubhumanRecords

Re: Dual Mid 1084 Clone Project
« Reply #49 on: May 24, 2018, 12:08:45 AM »
Page 4


SIXTYNINER

Re: Dual Mid 1084 Clone Project
« Reply #50 on: June 14, 2018, 12:15:09 PM »
Many thanks for posts SubhumanRecords
this help to have Neil with us.

anybody have more docs-helps like pcb images , schematics ,
calibration info , etc… ?
more thanks

« Last Edit: June 15, 2018, 03:57:29 AM by SIXTYNINER »
>>" 1 Picture say what billions words cannot "<< - >>"SMD Kill the DIY STAR"<<
Why in the  forum  if no share

r2d2

Re: Dual Mid 1084 Clone Project
« Reply #51 on: June 26, 2018, 09:51:07 AM »
As many members of this place just know ,
unfortunately "Bruno2000" ( sadly ) is no more with us (R.i.p.)  :'(

we were in touch for another run of the 1084 dual mid project ,
unfortunately the time was not our friend ,

this post as invitation to anyone would like to contribute
with any doc (image, schematic, bom, etc.. )
and post with related build help ,
useful  to make it and complete it .

In memory of  : "Bruno2000",

very thanks in advance for any post or pm about .

+ 1 here interested to build some dual mid 1084
in memory of the nice guy  "Bruno2000"!

who have built the modules have some more documentation
like schematics , images of pcb and other more as help ?
thanks
« Last Edit: July 18, 2018, 08:47:13 AM by r2d2 »
..... Cracking D.Vader Firewall ...  II-)

Zander

Re: Dual Mid 1084 Clone Project
« Reply #52 on: August 07, 2018, 03:13:42 AM »
Hi,

I’m building 8 units too. I have info: pdf bom, schematic and written info in my mail from Joe. (Pm me with what you need)
So the ones who have build the 1084’s where did you source the hollow shaft switch? I have the correct part no from Grayhill but the MOQ is 25 pcs. @ €45/pce...

Zander

Re: Dual Mid 1084 Clone Project
« Reply #53 on: August 07, 2018, 05:45:01 AM »
Ok. So I've found something dubious. I have rev 5.1 and the layout in pdf of 4.9. In rev 4.9 R211 is 91R and is clearly located around C210 (400uF/4V) and connected to its negative leg. In the original BA283 schematic the value is 1K8. In my rev 5.1 the location where R211 was is now R214 but I don't have the corresponding BOM. What would you do?
*In the BOM Subhumanrecords posted above this seems corrected to R214= 91R*
« Last Edit: August 07, 2018, 06:00:25 AM by Zander »

Zander

Re: Dual Mid 1084 Clone Project
« Reply #54 on: August 14, 2018, 02:24:15 AM »
I can’t find R215 & R2105 (BOM 4.9-5.1) on the schematic (5.1), layout (4.9) or the PCB (5.1). Would these be left out?
I believe R2105 is left out the sensitivity switch in the ‘off’ position, but I can’t find where R215 would have been, maybe the optional input Zobel which is now marked R216?
« Last Edit: August 14, 2018, 02:49:18 AM by Zander »

Zander

Re: Dual Mid 1084 Clone Project
« Reply #55 on: August 22, 2018, 04:58:58 AM »
Is there someone here who has a finished unit of Joe which has the hollow shaft switch installed? I need the part number of that switch. It seems like I got the weong part number from Joe. My part number includes another switch already attached to it.

SubhumanRecords

Re: Dual Mid 1084 Clone Project
« Reply #56 on: August 22, 2018, 07:00:44 AM »
This is what he help me with on the 1081, I built a couple, couldn’t find anymore.

r2d2

Re: Dual Mid 1084 Clone Project
« Reply #57 on: August 26, 2018, 02:03:46 PM »
This is what he help me with on the 1081, I built a couple, couldn’t find anymore.
hi "SubhumanRecords"
please could you check about the attached  ?
it say me : "404 error "
( as showed in my attached...)
let me know
cheers
« Last Edit: August 27, 2018, 03:43:12 AM by r2d2 »
..... Cracking D.Vader Firewall ...  II-)

abbey road d enfer

Re: Dual Mid 1084 Clone Project
« Reply #58 on: August 27, 2018, 04:12:48 AM »
This is what he help me with on the 1081, I built a couple, couldn’t find anymore.
Please upload to GDIY instead of temporary links.
Who's right or wrong is irrelevant. What matters is what's right or wrong.
"The important thing is not to convince, but to give pause for thought." (B. Werber)
Star ground is for electricians.

SubhumanRecords

Re: Dual Mid 1084 Clone Project
« Reply #59 on: August 27, 2018, 09:21:28 PM »
Hollowshaft..


 

Related Topics

  Subject / Started by Replies Last post
6 Replies
4622 Views
Last post September 01, 2007, 04:06:32 PM
by audioforge
83 Replies
28480 Views
Last post February 27, 2015, 06:31:35 AM
by r2d2
1 Replies
1214 Views
Last post February 28, 2009, 01:56:44 PM
by NewYorkDave
5 Replies
1247 Views
Last post March 25, 2013, 07:13:51 AM
by Harpo