Thanks!
The subfascia needs to have the folded edges to be stable when using the knobs and buttons.
Otherwise they would flex to much.
Yes, thumbscrews are included and will most likely be M3.5, only becuase the tapped strips for the ISEP rails you can get now are that size.
Will look into original 4BA as well though.
The rods in these pictures are actualyl from an AMS reissue, and they are a little bigger actually so good catch!
Mine will be in mm and not inches, but as close to the original as possible, but its very minor differences between them all.
Yes, they are aluminium and kind of expensive to get made with all the drilling and tapping.
The subfascia needs to have the folded edges to be stable when using the knobs and buttons.
Otherwise they would flex to much.
Yes, thumbscrews are included and will most likely be M3.5, only becuase the tapped strips for the ISEP rails you can get now are that size.
Will look into original 4BA as well though.
The rods in these pictures are actualyl from an AMS reissue, and they are a little bigger actually so good catch!
Mine will be in mm and not inches, but as close to the original as possible, but its very minor differences between them all.
Yes, they are aluminium and kind of expensive to get made with all the drilling and tapping.