Recently built an 1176 Rev A Kit by Hairball Audio, well it seems either my input or my output is not working. When I plug it in everything seems fine but when I plug into Pro Tools via 003. The only audible noise is a ground hum and if I turn it up loud enough I get radio station frequencies. Well my Input doesn't do anything and the only thing that comes out is a ground hum but the Output volume knob doesn't control the volume of that ground hum. So I am stuck, if you need anymore information I'll be on every hour. but I could really use some help, this is my first big DIY project.
Thank you
Zachery Caron
Thank you
Zachery Caron