cmuller0420

    Kelowna, British Columbia, Canada
  • Posts: 164
UPDATED COMPLETE LIST Microphones Available

1.  TM-66 Tube mic - includes Shock Mount, Power Supply, Foam Windshield, Aluminum Case, Leather Bag, 7pin XLR 
     Price: $240 US
     Dimensions:  I deleted this and have forgotten...will repost later on.
     Mic Info:  http://www.iskmic.com/isktm66.htm




2.  TRM-9 Tube mic - includes Shock Mount, Power Supply, Foam Windshield, Aluminum Case, Leather Bag, 7pin XLR 
     Price: $260 US
     Dimensions: 50.5mm x 210mm
     Data Sheet: http://procanaudio.ca/TRM9.pdf




3.  RM-6 - includes shock mount and aluminum case   
     Price: $150 US
     Dimensions: 50.5mm x 187.5mm
     Data Sheet: http://procanaudio.ca/RM%206.pdf




4.  TRM-11 Tube Mic - includes Shock Mount, Power Supply, Foam Windshield, Aluminum Case, Leather Bag, 7pin XLR 
     Price: $260 US
     Dimensions: 60mm diameter x 59mm x 210mm
     Data Sheet: http://procanaudio.ca/TRM%2011%20leaflet.pdf




5.  BM-600 - includes Shock Mount, Foam Windscreen, Leather Bag & Aluminum Case
     Price: $105 US
     Dimensions: 50mm diameter x 190mm
     Data Sheet:  http://procanaudio.ca/BM-600.pdf




6.  BM-5100 - includes Shock Mount, Foam Windscreen, Leather Pouch, Aluminum Case & 6m XLR cable
     Price: $115 US
     
     Data Sheet:  http://procanaudio.ca/BM-5100.pdf




7.  BM-5200 - includes Shock Mount, Foam Windscreen, Leather Pouch, Aluminum Case & 6m XLR cable
     Price: $120 US

     Data Sheet:  http://procanaudio.ca/BM-5200.pdf




Microphones will be complete iSK models ( that can be viewed either at www.iskmic.com or www.procanaudio.ca) minus the iSK branding and model number.

Cases: Aluminum


Shockmounts (see attached file for pictures of models with M22x1 thread)

SHM-7    $22.50
SHM-7A  $25.00
SHM-8    $19
SHM-8A  $20
SMP-1    $38


Payment methods: PayPal

Expected Lead Time:  Will have posting up for a couple weeks.  The order will be placed with my next iSK order in the
                                   next month.  Factory lead time is a couple weeks until shipped.  So I would say 6-8 weeks at this point.

Shipping Cost:  From here in Kelowna, B.C. Canada to US ZIP: 94121 - Canada Post Expedited Parcel to USA 5 business days

1 - $29
2 - $39
3 - $52
4 - $60

Websites:  www.procanaudio.ca


Orders:

tommypiper  2 - BM-600
rmaier          2 - BM-600
JamesW        2 - BM-600
poctop          1 - BM-600
kevinkase.    2 - BM-600
lolo-m          2 - BM-600    2 - SHM-7A
mylesgm      2 - BM-600    2 - SHM-7A
« Last Edit: May 01, 2012, 08:18:55 PM by cmuller0420 »


tchgtr

Re: Feeler: Microphone bodies
« Reply #1 on: March 15, 2012, 01:12:47 PM »
Interested, but only in one or two at this point, dependent upon price, and the body style everyone chooses. What you have pictured looks OK. I guess it also include the PSU box?
Resistance is not futile. It is voltage divided by current.  (thanks, Bill)

cmuller0420

    Kelowna, British Columbia, Canada
  • Posts: 164
Re: Feeler: Microphone bodies
« Reply #2 on: March 15, 2012, 01:39:29 PM »
Well if anyone is interested, I have relabelled them mic 1-6.  Let me know what your intersted in and with the most popular ones I can get a total number and check into pricing.  If an order does get placed, the microphones will not be branded in any way.  Just a blank body.

For now it would be only the microphone body and possible a psu case.


spase

Re: Feeler: Microphone bodies
« Reply #3 on: March 15, 2012, 02:25:14 PM »
I think the first one can be good for a N*umann u47fet,the secound one for N*umann u47 long body style and the sixt for N*umann u87 :)))
give us a price to know how much we can afford.Regards

tchgtr

Re: Feeler: Microphone bodies
« Reply #4 on: March 15, 2012, 04:34:32 PM »
I would prefer #1 or #2.
Does 2 come without the gold?
I definitely would like a PSU case, or even a completed PSU, but would still consider if others did not want this, or if the price was too high.
Thanks
Resistance is not futile. It is voltage divided by current.  (thanks, Bill)

spase

Re: Feeler: Microphone bodies
« Reply #5 on: March 15, 2012, 04:36:02 PM »
yes the second one could be silver not gold :)

MicDaddy

Re: Feeler: Microphone bodies
« Reply #6 on: March 15, 2012, 04:53:41 PM »
I'm game if the $$ is right

Ballpark figure for a shell and psu chassis?

micaddict

Re: Feeler: Microphone bodies
« Reply #7 on: March 15, 2012, 04:58:56 PM »
ShuaiYin/Feilo > Alctron, Nady, Apex, T.bone, BM and a host of other rebranded mics.

The first is like the T.bone SCT700 that is used for the MK7 and MK47 builds on this forum.
Might be interesting (if the price is good).
« Last Edit: March 15, 2012, 05:19:20 PM by micaddict »

micaddict

Re: Feeler: Microphone bodies
« Reply #8 on: March 15, 2012, 05:09:14 PM »
FWIW Ben Sneesby (Beesneez Microphones) used a couple of those body models when he hit the market a couple of years ago, before he started making his own bodies.
# 2 is quite common, too.

Is there also a slim version (Apex 460, T.bone SCT800)?
« Last Edit: March 15, 2012, 05:16:10 PM by micaddict »

Re: Feeler: Microphone bodies
« Reply #9 on: March 15, 2012, 05:30:08 PM »
count me in the deal,  whatever you can have, 

Cheers,
Dan,


Jim50hertz

Re: Feeler: Microphone bodies
« Reply #10 on: March 15, 2012, 05:37:42 PM »
Are you able to secure these?



If so I'd like two of them.  Can you get the switches? (Pattern/Pad/Roll off)

Cheers

Jim
« Last Edit: March 15, 2012, 05:44:12 PM by Jim50hertz »
"Nasty, talking to a slightly deaf journalist, had claimed only that the Rutles were bigger than Rod."

spase

Re: Feeler: Microphone bodies
« Reply #11 on: March 15, 2012, 05:39:42 PM »
yeah good u87 body :)))

wtmnmf

Re: Feeler: Microphone bodies
« Reply #12 on: March 15, 2012, 05:42:13 PM »
Interested  8)

cmuller0420

    Kelowna, British Columbia, Canada
  • Posts: 164
Re: Feeler: Microphone bodies
« Reply #13 on: March 15, 2012, 05:45:06 PM »
Yes I do have the bm-600 style available.  lets call that #8 then.

I will try and secure pricing in the next couple days to let everyone know and see what the interest is.  As for switches, not sure but I will check.


micaddict

Re: Feeler: Microphone bodies
« Reply #15 on: March 15, 2012, 07:01:16 PM »
If possible, it might be useful to list the relevant dimensions for each model. (Like 58.5 x 180 mm for #1, I think.)
E.g to check if some of the popular groupdiy PCB's will fit.

Re: Feeler: Microphone bodies
« Reply #16 on: March 15, 2012, 08:13:44 PM »
I would also be in for 1,2,7 and 8 depending on price.

JamesW

Re: Feeler: Microphone bodies
« Reply #17 on: March 15, 2012, 09:02:31 PM »
I would be in for a pair of #8
Subject to change with out notice

tommypiper

Re: Feeler: Microphone bodies
« Reply #18 on: March 15, 2012, 11:44:25 PM »
What's the sizing on #1?

I'd like #1, #2 (210mm tube size), #8.  Looks good!  Hope it works out.


Can you secure shock mounts and wooden boxes?

EDIT:
Let us know about capsules.  Getting a sample or two of the capsules for evaluation would be a HUGE help so we 'll know what we're dealing with.  All the group buys on capsules so far have been known products, or someone has testified that they're good.  Someone on the forum could hook up your capsules and let us know how they sound. Otherwise, unless we can identify them from current shipping products, we won't know what they're like performance-wise.

Gotta say, #5 is butt ugh... I'm sure could make a fine mic, not my taste anyway...  :)
« Last Edit: March 15, 2012, 11:59:18 PM by tommypiper »
Imagine a wet, slightly chilled from its gas release and decompression, with water droplets condensing, sucking surface tension, slowly sliding down the side, capped by a healthy virgin froth on top..

cmuller0420

    Kelowna, British Columbia, Canada
  • Posts: 164
Re: Feeler: Microphone bodies
« Reply #19 on: March 16, 2012, 12:14:12 AM »
Shockmounts are not a problem.  As for wooden boxes I am not sure.

For right now capsules will not be available, however when they are I can send some to someone for evaluation. I do know that the company I am working with makes capsules for quite a few microphone manufacturers, so the quality should be pretty good, but we will see.

Waiting to hear from the manufacturer on the size of #1


 

Related Topics

  Subject / Started by Replies Last post
30 Replies
8338 Views
Last post October 22, 2004, 12:46:16 PM
by rafafredd
33 Replies
12052 Views
Last post March 04, 2006, 09:48:04 PM
by northsiderap
18 Replies
4128 Views
Last post July 22, 2006, 12:53:34 AM
by 12afael
5 Replies
3342 Views
Last post October 20, 2006, 11:10:21 PM
by kiira